Comparison Ferrari 330 GT 2+2 (Serie 2) 4.0 V12 (300 Hp) & Citroen CX I (Phase I, 1982) 25 GTi Turbo (168 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Ferrari | Citroen |
| Model: | 330 | CX |
| Generation: | 330 GT 2+2 (Serie 2) | CX I (Phase I, 1982) |
| Engine / modification: | 4.0 V12 (300 Hp) | 25 GTi Turbo (168 Hp) |
| Production start: | 1964 year | 1984 year |
| Production end: | 1967 year | 1985 year |
| Coupe type: | Coupe | Hatchback |
| Num. of Doors: | 2 | 5 |
| Num. of seats: | 2+2 | 5 |
| Fuel consumption / economy - combined: | 18-20 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Drag coefficient: | 0.36 | |
| Fuel tank volume: | 90 l | 68 l |
| Power: | 300 hp | 168 hp |
| Max power in: | 7000 rpm. | 5000 rpm. |
| Maximum speed: | 245 km/h | 220 km/h |
| Acceleration from 0 to 100 km/h: | 8 sec | |
| Torque: | 294 Nm @ 3250 rpm. | |
| Engine position: | Front, longitudinal | Front, transverse |
| Engine displacement: | 3967 cm3 | 2499 cm3 |
| Engine oil capacity: | 10 l | 6.0 l |
| Coolant: | 12.5 l | 13 l |
| Fuel System: | Carburettor | Multi-point injection |
| Aspiration / Turbine: | Turbocharging | |
| Position of cylinders: | Inline | |
| Valvetrain: | SOHC | |
| Number of cylinders: | 12 | 4 |
| Number of valves per cylinder: | 2 | 2 |
| Compression ratio: | 8.8 | 7.75 |
| Piston Stroke: | 71 mm | 92 mm |
| Cylinder Bore: | 77 mm | 93 mm |
| Wheel Drive: | Rear wheel drive | Front wheel drive |
| Number of Gears (manual transmission): | 5 | 5 |
| Length: | 4840 mm | 4659 mm |
| Width: | 1715 mm | 1770 mm |
| Height: | 1360 mm | 1360 mm |
| Wheelbase: | 2650 mm | 2845 mm |
| Front track: | 1397 mm | 1522 mm |
| Rear (Back) track: | 1389 mm | 1368 mm |
| Front overhang: | 1050 mm | |
| Rear overhang: | 764 mm | |
| Minimum volume of Luggage (trunk): | 325 l | |
| Max weight: | 1880 kg | |
| Front brakes: | Disc | Ventilated discs |
| Rear brakes: | Disc | Disc |
| Kerb Weight: | 1380 kg | 1385 kg |
| Steering type: | Worm-reduction unit | Steering rack and pinion |
| Minimum turning circle (turning diameter): | 11.7 m |