Comparison Dodge Daytona 2.2i (174 Hp) TurboII & Volkswagen Golf VII GTD 2.0 TDI (184 Hp) DSG
Add car |
Remove car |
Remove car |
| Brand: | Dodge | Volkswagen |
| Model: | Daytona | Golf |
| Generation: | Daytona | Golf VII |
| Engine / modification: | 2.2i (174 Hp) TurboII | GTD 2.0 TDI (184 Hp) DSG |
| Production start: | 1989 year | 2013 year |
| Production end: | 1989 year | 2017 year |
| Coupe type: | Hatchback | Hatchback |
| Num. of Doors: | 3 | 2 |
| Num. of seats: | 2+2 | 4 |
| Fuel consumption / economy - urban: | 5.5 l/100 km | |
| Fuel consumption / economy - extra urban: | 4.0 l/100 km | |
| Fuel consumption / economy - combined: | 4.5 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Diesel |
| Fuel tank volume: | 50 l | |
| Emission standard: | Euro 6 | |
| CO2 emissions: | 119 g/km | |
| Power: | 174 hp | 184 hp |
| Max power in: | 3500-4000 rpm. | |
| Maximum speed: | 228 km/h | |
| Acceleration from 0 to 100 km/h: | 7.5 sec | |
| Torque: | 380 Nm @ 1750-3250 rpm. | |
| Model Engine: | CUNA, DGCA | |
| Engine position: | Front, transverse | |
| Engine displacement: | 2213 cm3 | 1968 cm3 |
| Engine oil capacity: | 4.7 l | |
| Fuel System: | Mono-point injection | Diesel Commonrail |
| Aspiration / Turbine: | Turbocharging | Turbo / Intercooler (Turbocharging / Intercooler) |
| Position of cylinders: | Inline | Inline |
| Number of cylinders: | 4 | 4 |
| Number of valves per cylinder: | 2 | 4 |
| Compression ratio: | 9.5 | |
| Piston Stroke: | 92 mm | |
| Cylinder Bore: | 87.5 mm | |
| Wheel Drive: | Front wheel drive | |
| Number of Gears (automatic transmission): | 6 DSG | |
| Length: | 4544 mm | 4268 mm |
| Width: | 1760 mm | 1799 mm |
| Height: | 1278 mm | 1442 mm |
| Wheelbase: | 2464 mm | 2631 mm |
| Front track: | 1538 mm | |
| Rear (Back) track: | 1517 mm | |
| Minimum volume of Luggage (trunk): | 380 l | |
| Maximum amount of Luggage (trunk): | 1270 l | |
| Max weight: | 1880 kg | |
| Front brakes: | Ventilated discs | |
| Kerb Weight: | 1395 kg | |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Minimum turning circle (turning diameter): | 10.9 m | |
| Tire size: | 195/60 R15 |