Comparison Dodge Challenger R/T 6.3 V8 (300 Hp) & Opel Vectra A (facelift 1992) 1.7 D (60 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Dodge | Opel |
| Model: | Challenger | Vectra |
| Generation: | Challenger | Vectra A (facelift 1992) |
| Engine / modification: | R/T 6.3 V8 (300 Hp) | 1.7 D (60 Hp) |
| Production start: | 1969 year | 1992 year |
| Production end: | 1974 year | 1995 year |
| Coupe type: | Coupe | Sedan |
| Num. of Doors: | 2 | 4 |
| Num. of seats: | 5 | 5 |
| Fuel consumption / economy - urban: | 5.9 l/100 km | |
| Fuel consumption / economy - extra urban: | 4.1 l/100 km | |
| Fuel consumption / economy - combined: | 6.0 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Diesel |
| Drag coefficient: | 0.29 | |
| Fuel tank volume: | 54 l | 61 l |
| Power: | 300 hp | 60 hp |
| Max power in: | 4800 rpm. | 4400 rpm. |
| Maximum speed: | 152 km/h | |
| Acceleration from 0 to 100 km/h: | 20.5 sec | |
| Torque: | 105 Nm @ 2650 rpm. | |
| Engine position: | Front, longitudinal | Front, transverse |
| Engine displacement: | 6276 cm3 | 1686 cm3 |
| Engine oil capacity: | 3.8 l | |
| Coolant: | 11.5 l | |
| Fuel System: | Carburettor | Diesel - Standard diesel injection (SDI) |
| Position of cylinders: | Inline | |
| Valvetrain: | OHV | OHC |
| Number of cylinders: | 8 | 4 |
| Number of valves per cylinder: | 2 | 2 |
| Compression ratio: | 8.5 | 23 |
| Piston Stroke: | 85.85 mm | 86 mm |
| Cylinder Bore: | 107.95 mm | 79 mm |
| Wheel Drive: | Rear wheel drive | Front wheel drive |
| Number of Gears (manual transmission): | 4 | 5 |
| Length: | 4859 mm | 4432 mm |
| Width: | 1933 mm | 1706 mm |
| Height: | 1293 mm | 1400 mm |
| Wheelbase: | 2794 mm | 2600 mm |
| Front track: | 1516 mm | 1420 mm |
| Rear (Back) track: | 1565 mm | 1423 mm |
| Minimum volume of Luggage (trunk): | 530 l | |
| Maximum amount of Luggage (trunk): | 840 l | |
| Steering type: | Cone worm with recirculation balls | |
| Wheel rims size: | Front wheel rims: 5J x 14 |