Comparison Dodge Challenger R/T 6.3 V8 (275 Hp) & Opel Corsavan D (Facelift 2011) 1.3 CDTI (95 Hp) Ecotec ecoFLEX start/stop
Add car |
Remove car |
Remove car |
| Brand: | Dodge | Opel |
| Model: | Challenger | Corsa |
| Generation: | Challenger | Corsavan D (Facelift 2011) |
| Engine / modification: | R/T 6.3 V8 (275 Hp) | 1.3 CDTI (95 Hp) Ecotec ecoFLEX start/stop |
| Production start: | 1969 year | 2011 year |
| Production end: | 1974 year | 2014 year |
| Coupe type: | Coupe | Minivan |
| Num. of Doors: | 2 | 3 |
| Num. of seats: | 5 | 2 |
| Fuel consumption / economy - urban: | 3.8 l/100 km | |
| Fuel consumption / economy - extra urban: | 3.1 l/100 km | |
| Fuel consumption / economy - combined: | 3.3 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Diesel |
| Fuel tank volume: | 54 l | |
| Emission standard: | EURO V | |
| CO2 emissions: | 88 g/km | |
| Power: | 275 hp | 95 hp |
| Max power in: | 4400 rpm. | 4000 rpm. |
| Maximum speed: | 177 km/h | |
| Acceleration from 0 to 100 km/h: | 12.3 sec | |
| Torque: | 190 Nm/1750-3250 rpm. | |
| Engine position: | Front, longitudinal | Front, transverse |
| Engine displacement: | 6276 cm3 | 1248 cm3 |
| Engine oil capacity: | 3.8 l | |
| Coolant: | 11.5 l | |
| Fuel System: | Carburettor | Diesel Commonrail |
| Aspiration / Turbine: | Turbo / Intercooler (Turbocharging / Intercooler) | |
| Position of cylinders: | Inline | |
| Valvetrain: | OHV | |
| Number of cylinders: | 8 | 4 |
| Number of valves per cylinder: | 2 | |
| Compression ratio: | 8.5 | |
| Piston Stroke: | 85.85 mm | 82 mm |
| Cylinder Bore: | 107.95 mm | 69.6 mm |
| Wheel Drive: | Rear wheel drive | Front wheel drive |
| Number of Gears (manual transmission): | 4 | 5 |
| Length: | 4859 mm | 3999 mm |
| Width: | 1933 mm | 1944 mm |
| Height: | 1293 mm | 1488 mm |
| Wheelbase: | 2794 mm | 2511 mm |
| Front track: | 1516 mm | 1485 mm |
| Rear (Back) track: | 1565 mm | 1478 mm |
| Minimum volume of Luggage (trunk): | 919 l | |
| ABS: | yes | |
| Steering type: | Cone worm with recirculation balls | Steering rack and pinion |
| Minimum turning circle (turning diameter): | 10.4 m | |
| Wheel rims size: | Front wheel rims: 5J x 14 |