Comparison Dodge Challenger 7.0 V8 Hemi (425 Hp) & Mazda Sentia (HC) 3.0 i V6 24V (200 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Dodge | Mazda |
| Model: | Challenger | Sentia |
| Generation: | Challenger | Sentia (HC) |
| Engine / modification: | 7.0 V8 Hemi (425 Hp) | 3.0 i V6 24V (200 Hp) |
| Production start: | 1969 year | 1991 year |
| Production end: | 1974 year | 1996 year |
| Coupe type: | Coupe | Sedan |
| Num. of Doors: | 2 | 4 |
| Num. of seats: | 5 | 5 |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 54 l | 70 l |
| Power: | 425 hp | 200 hp |
| Max power in: | 5000 rpm. | 6000 rpm. |
| Maximum speed: | 250 km/h | 220 km/h |
| Torque: | 260 Nm @ 4500 rpm. | |
| Engine position: | Front, longitudinal | Front, longitudinal |
| Engine displacement: | 6981 cm3 | 2954 cm3 |
| Engine oil capacity: | 5.7 l | |
| Coolant: | 12.6 l | |
| Fuel System: | Carburettor | Multi-point injection |
| Position of cylinders: | V engine | |
| Valvetrain: | OHV | DOHC |
| Number of cylinders: | 8 | 6 |
| Number of valves per cylinder: | 2 | 4 |
| Compression ratio: | 10.2 | 9.5 |
| Piston Stroke: | 95.25 mm | 77.4 mm |
| Cylinder Bore: | 107.95 mm | 90 mm |
| Wheel Drive: | Rear wheel drive | |
| Number of Gears (automatic transmission): | 4 | |
| Number of Gears (manual transmission): | 4 | |
| Length: | 4859 mm | 4920 mm |
| Width: | 1933 mm | 1795 mm |
| Height: | 1293 mm | 1395 mm |
| Wheelbase: | 2794 mm | 2850 mm |
| Front track: | 1516 mm | 1510 mm |
| Rear (Back) track: | 1565 mm | 1520 mm |
| Front suspension: | Torsion | Coil spring |
| Rear suspension: | Double wishbone | |
| Front brakes: | Ventilated discs | |
| Rear brakes: | Disc | |
| Kerb Weight: | 1640 kg | |
| ABS: | yes | |
| Steering type: | Cone worm with recirculation balls | |
| Power steering: | Hydraulic Steering | |
| Tire size: | 205/65 R15 93 H | |
| Wheel rims size: | Front wheel rims: 7J x 15 | 6J x 15 ET 50 |