Comparison Citroen DS 3 1.2 VTi (82 Hp) & Peugeot 308 SW II 1.6 HDi (92 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Citroen | Peugeot |
| Model: | DS3 | 308 |
| Generation: | DS 3 | 308 SW II |
| Engine / modification: | 1.2 VTi (82 Hp) | 1.6 HDi (92 Hp) |
| Production start: | 2012 year | 2013 year |
| Production end: | 2014 year | |
| Coupe type: | Hatchback | Combi |
| Num. of Doors: | 3 | 5 |
| Num. of seats: | 5 | 5 |
| Fuel consumption / economy - urban: | 4.5 l/100 km | |
| Fuel consumption / economy - extra urban: | 3.5 l/100 km | |
| Fuel consumption / economy - combined: | 4.5 l/100 km | 3.8 l/100 km |
| Fuel Type: | Petrol (Gasoline) | Diesel |
| Fuel tank volume: | 53 l | |
| Emission standard: | EURO V | |
| CO2 emissions: | 99 g/km | |
| Power: | 82 hp | 92 hp |
| Max power in: | 4000 rpm. | |
| Maximum speed: | 181 km/h | |
| Acceleration from 0 to 100 km/h: | 11.9 sec | |
| Torque: | 230 Nm/1750 rpm. | |
| Engine position: | Front, transverse | Front, transverse |
| Engine displacement: | 1560 cm3 | |
| Fuel System: | Multi-point injection | Diesel Commonrail |
| Aspiration / Turbine: | Turbocharging | |
| Position of cylinders: | Inline | Inline |
| Number of cylinders: | 4 | |
| Number of valves per cylinder: | 2 | |
| Wheel Drive: | Front wheel drive | Front wheel drive |
| Number of Gears (manual transmission): | 5 | 5 |
| Length: | 3948 mm | 4585 mm |
| Width: | 1715 mm | 1863 mm |
| Height: | 1458 mm | 1461/1472 mm |
| Wheelbase: | 2464 mm | 2730 mm |
| Front track: | 1465 mm | 1551/1563 mm |
| Rear (Back) track: | 1467 mm | 1546/1557 mm |
| Ride height(clearance): | 109 mm | |
| Minimum volume of Luggage (trunk): | 610 l | |
| Maximum amount of Luggage (trunk): | 1660 l | |
| Front suspension: | Independent, Spring McPherson, with stabilizer | |
| Rear suspension: | Semi-independent, spring | |
| Max weight: | 1850 kg | |
| Front brakes: | Ventilated discs | |
| Rear brakes: | Disc | |
| Kerb Weight: | 1180 kg | |
| ABS: | yes | yes |
| Steering type: | Steering rack and pinion | Steering rack and pinion |
| Minimum turning circle (turning diameter): | 11.2 m |