Comparison Citroen CX I (Phase I, 1982) Limousine 25 D Turbo (95 Hp) & Jeep Liberty II 3.7 i V6 12V (213 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Citroen | Jeep |
| Model: | CX | Liberty |
| Generation: | CX I (Phase I, 1982) | Liberty II |
| Engine / modification: | Limousine 25 D Turbo (95 Hp) | 3.7 i V6 12V (213 Hp) |
| Production start: | 1983 year | 2007 year |
| Production end: | 1985 year | |
| Coupe type: | Hatchback | Off-road vehicle |
| Num. of Doors: | 5 | 5 |
| Num. of seats: | 5 | 5 |
| Fuel Type: | Diesel | Petrol (Gasoline) |
| Drag coefficient: | 0.36 | |
| Fuel tank volume: | 68 l | |
| Power: | 95 hp | 213 hp |
| Max power in: | 3700 rpm. | 5200 rpm. |
| Maximum speed: | 174 km/h | |
| Acceleration from 0 to 100 km/h: | 13.7 sec | |
| Torque: | 216 Nm @ 2000 rpm. | 318 Nm/4000 rpm. |
| Engine position: | Front, transverse | Front, longitudinal |
| Engine displacement: | 2499 cm3 | 3701 cm3 |
| Fuel System: | Diesel - Standard diesel injection (SDI) | Multi-point injection |
| Aspiration / Turbine: | Turbocharging | |
| Position of cylinders: | Inline | V engine |
| Number of cylinders: | 4 | 6 |
| Number of valves per cylinder: | 2 | 2 |
| Compression ratio: | 21 | 9.1 |
| Piston Stroke: | 92 mm | 90.8 mm |
| Cylinder Bore: | 93 mm | 93 mm |
| Wheel Drive: | Rear wheel drive | |
| Number of Gears (automatic transmission): | 6 | |
| Number of Gears (manual transmission): | 5 | 4 |
| Length: | 4916 mm | 4493 mm |
| Width: | 1770 mm | 1838 mm |
| Height: | 1375 mm | 1808 mm |
| Wheelbase: | 3095 mm | 2684 mm |
| Front track: | 1522 mm | 1549 mm |
| Rear (Back) track: | 1368 mm | 1549 mm |
| Front overhang: | 1057 mm | |
| Rear overhang: | 764 mm | |
| Minimum volume of Luggage (trunk): | 325 l | 590 l |
| Maximum amount of Luggage (trunk): | 1800 l | |
| Max weight: | 1920 kg | |
| Front brakes: | Ventilated discs | Ventilated discs |
| Rear brakes: | Disc | Disc |
| Kerb Weight: | 1450 kg | |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | Steering rack and pinion |
| Power steering: | Hydraulic Steering | |
| Minimum turning circle (turning diameter): | 13.4 m |