Comparison Citroen CX I (Phase I, 1982) Limousine 25 D Turbo (95 Hp) & Chevrolet Camaro III (facelift 1991) RS 3.1 V6 MFI (140 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Citroen | Chevrolet |
| Model: | CX | Camaro |
| Generation: | CX I (Phase I, 1982) | Camaro III (facelift 1991) |
| Engine / modification: | Limousine 25 D Turbo (95 Hp) | RS 3.1 V6 MFI (140 Hp) |
| Production start: | 1983 year | 1991 year |
| Production end: | 1985 year | 1992 year |
| Coupe type: | Hatchback | Coupe |
| Powertrain Architecture: | Internal Combustion engine | |
| Num. of Doors: | 5 | 2 |
| Num. of seats: | 5 | 4 |
| Fuel Type: | Diesel | Petrol (Gasoline) |
| Drag coefficient: | 0.36 | |
| Fuel tank volume: | 68 l | 59 l |
| Power: | 95 hp | 140 hp |
| Max power in: | 3700 rpm. | 4400 rpm. |
| Maximum speed: | 174 km/h | |
| Acceleration from 0 to 100 km/h: | 13.7 sec | |
| Torque: | 216 Nm @ 2000 rpm. | |
| Engine position: | Front, transverse | Front, longitudinal |
| Engine displacement: | 2499 cm3 | 3130 cm3 |
| Engine oil capacity: | 4.3 l | |
| Fuel System: | Diesel - Standard diesel injection (SDI) | Multi-point indirect injection |
| Aspiration / Turbine: | Turbocharging | Naturally aspirated engine |
| Position of cylinders: | Inline | V engine |
| Number of cylinders: | 4 | 6 |
| Number of valves per cylinder: | 2 | |
| Compression ratio: | 21 | 8.5 |
| Piston Stroke: | 92 mm | 84 mm |
| Cylinder Bore: | 93 mm | 89 mm |
| Wheel Drive: | Rear wheel drive | |
| Number of Gears (manual transmission): | 5 | |
| Length: | 4916 mm | 4983 mm |
| Width: | 1770 mm | 1849 mm |
| Height: | 1375 mm | 1278 mm |
| Wheelbase: | 3095 mm | 2565 mm |
| Front track: | 1522 mm | 1524 mm |
| Rear (Back) track: | 1368 mm | 1547 mm |
| Front overhang: | 1057 mm | |
| Rear overhang: | 764 mm | |
| Minimum volume of Luggage (trunk): | 325 l | |
| Maximum amount of Luggage (trunk): | 878 l | |
| Max weight: | 1920 kg | |
| Front brakes: | Ventilated discs | Disc |
| Rear brakes: | Disc | Drum |
| Kerb Weight: | 1450 kg | |
| Steering type: | Steering rack and pinion | Cone worm with recirculation balls |
| Power steering: | Hydraulic Steering | |
| Minimum turning circle (turning diameter): | 13.4 m | |
| Tire size: | 215/65 15 | |
| Wheel rims size: | 7J x 15 |