Comparison Citroen CX I (Phase I, 1982) 25 D (75 Hp) & Citroen CX I (Phase I, 1982) Prestige 25 (138 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Citroen | Citroen |
| Model: | CX | CX |
| Generation: | CX I (Phase I, 1982) | CX I (Phase I, 1982) |
| Engine / modification: | 25 D (75 Hp) | Prestige 25 (138 Hp) |
| Production start: | 1983 year | 1983 year |
| Production end: | 1985 year | 1985 year |
| Coupe type: | Hatchback | Hatchback |
| Num. of Doors: | 5 | 5 |
| Num. of seats: | 5 | 5 |
| Fuel Type: | Diesel | Petrol (Gasoline) |
| Drag coefficient: | 0.36 | 0.36 |
| Fuel tank volume: | 68 l | 68 l |
| Power: | 75 hp | 138 hp |
| Max power in: | 4250 rpm. | 5000 rpm. |
| Maximum speed: | 156 km/h | 200 km/h |
| Acceleration from 0 to 100 km/h: | 16.8 sec | 10.6 sec |
| Torque: | 150 Nm @ 2000 rpm. | 211 Nm @ 4000 rpm. |
| Engine position: | Front, transverse | Front, transverse |
| Engine displacement: | 2499 cm3 | 2499 cm3 |
| Engine oil capacity: | 5.3 l | |
| Coolant: | 12.3 l | |
| Fuel System: | Diesel - Standard diesel injection (SDI) | Multi-point injection |
| Maximum engine speed: | 6000 rpm. | |
| Position of cylinders: | Inline | Inline |
| Number of cylinders: | 4 | 4 |
| Number of valves per cylinder: | 2 | 2 |
| Compression ratio: | 22.25 | 8.75 |
| Piston Stroke: | 92 mm | 92 mm |
| Cylinder Bore: | 93 mm | 93 mm |
| Wheel Drive: | Front wheel drive | Front wheel drive |
| Number of Gears (manual transmission): | 5 | 5 |
| Length: | 4659 mm | 4916 mm |
| Width: | 1770 mm | 1770 mm |
| Height: | 1360 mm | 1375 mm |
| Wheelbase: | 2845 mm | 3095 mm |
| Front track: | 1514 mm | 1522 mm |
| Rear (Back) track: | 1360 mm | 1368 mm |
| Front overhang: | 1050 mm | 1057 mm |
| Rear overhang: | 764 mm | 764 mm |
| Minimum volume of Luggage (trunk): | 325 l | 325 l |
| Max weight: | 1890 kg | 1910 kg |
| Front brakes: | Ventilated discs | Ventilated discs |
| Rear brakes: | Disc | Disc |
| Kerb Weight: | 1370 kg | 1450 kg |
| Steering type: | Steering rack and pinion | Steering rack and pinion |
| Minimum turning circle (turning diameter): | 11.70 m | 13.4 m |