Comparison Citroen BX Break Phase II 19 TZI (120 Hp) CAT & Alpina C2 Cabrio (E30) 2.7 (209 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Citroen | Alpina |
| Model: | BX | C2 |
| Generation: | BX Break Phase II | C2 Cabrio (E30) |
| Engine / modification: | 19 TZI (120 Hp) CAT | 2.7 (209 Hp) |
| Production start: | 1990 year | 1986 year |
| Production end: | 1993 year | 1987 year |
| Coupe type: | Combi | Cabriolet |
| Num. of Doors: | 5 | |
| Num. of seats: | 5 | |
| Fuel consumption / economy - urban: | 11.4 l/100 km | |
| Fuel consumption / economy - extra urban: | 6.6 l/100 km | |
| Fuel consumption / economy - combined: | 8.7 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Drag coefficient: | 0.36 | |
| Fuel tank volume: | 66 l | |
| Power: | 120 hp | 209 hp |
| Max power in: | 6000 rpm. | |
| Maximum speed: | 189 km/h | |
| Acceleration from 0 to 100 km/h: | 10.9 sec | |
| Torque: | 150 Nm/3000 rpm. | |
| Engine position: | Front, transverse | |
| Engine displacement: | 1905 cm3 | |
| Fuel System: | Multi-point injection | |
| Position of cylinders: | Inline | |
| Number of cylinders: | 4 | |
| Number of valves per cylinder: | 2 | |
| Compression ratio: | 9.3 | |
| Piston Stroke: | 88 mm | |
| Cylinder Bore: | 83 mm | |
| Wheel Drive: | Front wheel drive | |
| Number of Gears (manual transmission): | 5 | |
| Length: | 4399 mm | |
| Width: | 1682 mm | |
| Height: | 1410 mm | |
| Wheelbase: | 2655 mm | |
| Front track: | 1420 mm | |
| Rear (Back) track: | 1364 mm | |
| Minimum volume of Luggage (trunk): | 512 l | |
| Maximum amount of Luggage (trunk): | 1803 l | |
| Front suspension: | Hydro-pneumatic element | |
| Rear suspension: | Trailing | |
| Max weight: | 1640 kg | |
| Front brakes: | Disc | |
| Rear brakes: | Disc | |
| Kerb Weight: | 1070 kg | |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Power steering: | Hydraulic Steering | |
| Minimum turning circle (turning diameter): | 11 m | |
| Tire size: | 175/65 R14 | |
| Wheel rims size: | R14 |