Comparison Chrysler Sebring II 2.4i 16V (172 Hp) & Ford Fusion II (facelift 2016) 2.5 (175 Hp) Automatic
Add car |
Remove car |
Remove car |
| Brand: | Chrysler | Ford |
| Model: | Sebring | Fusion |
| Generation: | Sebring II | Fusion II (facelift 2016) |
| Engine / modification: | 2.4i 16V (172 Hp) | 2.5 (175 Hp) Automatic |
| Production start: | 2006 year | 2016 year |
| Production end: | 2018 year | |
| Coupe type: | Sedan | Sedan |
| Num. of Doors: | 4 | 4 |
| Num. of seats: | 5 | 5 |
| Fuel consumption / economy - urban: | 12.3 l/100 km | 11.2 l/100 km |
| Fuel consumption / economy - extra urban: | 6.9 l/100 km | 7.3 l/100 km |
| Fuel consumption / economy - combined: | 8.9 l/100 km | 9.4 l/100 km |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Drag coefficient: | 0.30 | |
| Fuel tank volume: | 64 l | 62 l |
| Emission standard: | EURO V | |
| Power: | 172 hp | 175 hp |
| Max power in: | 5200 rpm. | 6000 rpm. |
| Maximum speed: | 200 km/h | 217 km/h |
| Acceleration from 0 to 100 km/h: | 11/3 sec | 9.5 sec |
| Torque: | 222 Nm/4000 rpm. | 237 Nm @ 4500 rpm. |
| Engine position: | Front, transverse | Front, transverse |
| Engine displacement: | 2429 cm3 | 2488 cm3 |
| Fuel System: | Multi-point injection | Multi-point injection |
| Position of cylinders: | Inline | Inline |
| Valvetrain: | DOHC | DOHC, Ti-VCT |
| Number of cylinders: | 4 | 4 |
| Number of valves per cylinder: | 4 | 4 |
| Compression ratio: | 9.4 | 9.7 |
| Piston Stroke: | 101 mm | 100 mm |
| Cylinder Bore: | 87.5 mm | 89 mm |
| Wheel Drive: | Front wheel drive | Front wheel drive |
| Number of Gears (automatic transmission): | 4 | 6 |
| Number of Gears (manual transmission): | 6 | |
| Length: | 4850 mm | 4872 mm |
| Width: | 1843 mm | 1852 mm |
| Width including mirrors: | 2121 mm | |
| Height: | 1497 mm | 1478 mm |
| Wheelbase: | 2767 mm | 2850 mm |
| Front track: | 1570 mm | 1593 mm |
| Rear (Back) track: | 1570 mm | 1585 mm |
| Minimum volume of Luggage (trunk): | 441 l | 453 l |
| Front suspension: | Co McPherson strut | Independent, Spring McPherson, with stabilizer |
| Rear suspension: | Several levers and rods | Multi-link independent |
| Max weight: | 2040 kg | |
| Front brakes: | Ventilated discs | Ventilated discs |
| Rear brakes: | Disc | Disc |
| Kerb Weight: | 1560 kg | 1575 kg |
| ABS: | yes | yes |
| Steering type: | Steering rack and pinion | Steering rack and pinion |
| Power steering: | Hydraulic Steering | |
| Minimum turning circle (turning diameter): | 11.5 m | |
| Tire size: | 215/55 R18 | 215/60 R16 |
| Wheel rims size: | 18 x 7.0" | R16 |