Comparison Chrysler Sebring Convertible III 2.7i V6 (188 Hp) Automatic & Ford S-MAX (facelift 2010) 2.0 EcoBoost (203 Hp) powershift
Add car |
Remove car |
Remove car |
| Brand: | Chrysler | Ford |
| Model: | Sebring | S-MAX |
| Generation: | Sebring Convertible III | S-MAX (facelift 2010) |
| Engine / modification: | 2.7i V6 (188 Hp) Automatic | 2.0 EcoBoost (203 Hp) powershift |
| Production start: | 2007 year | 2010 year |
| Production end: | 2014 year | |
| Coupe type: | Cabriolet | MPV |
| Num. of Doors: | 2 | 5 |
| Num. of seats: | 4 | 7 |
| Fuel consumption / economy - urban: | 11.0 l/100 km | |
| Fuel consumption / economy - extra urban: | 6.4 l/100 km | |
| Fuel consumption / economy - combined: | 8.1 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 64 l | 70 l |
| Emission standard: | EURO V | Euro 5 |
| Power: | 188 hp | 203 hp |
| Max power in: | 6400 rpm. | |
| Maximum speed: | 221 km/h | |
| Acceleration from 0 to 100 km/h: | 8.5 sec | |
| Torque: | 256 Nm/4000 rpm. | |
| Engine position: | Front, longitudinal | Front, transverse |
| Engine displacement: | 2736 cm3 | |
| Fuel System: | Multi-point injection | Direct injection |
| Aspiration / Turbine: | Turbocharging | |
| Position of cylinders: | V engine | Inline |
| Valvetrain: | DOHC | |
| Number of cylinders: | 6 | |
| Number of valves per cylinder: | 4 | |
| Compression ratio: | 9.7 | |
| Piston Stroke: | 78.5 mm | |
| Cylinder Bore: | 86 mm | |
| Wheel Drive: | Front wheel drive | Front wheel drive |
| Number of Gears (automatic transmission): | 4 | 6 |
| Length: | 4850 mm | 4903 mm |
| Width: | 1843 mm | 2154 mm |
| Height: | 1497 mm | 1660 mm |
| Wheelbase: | 2765 mm | |
| Minimum volume of Luggage (trunk): | 285 l | |
| Maximum amount of Luggage (trunk): | 2000 l | |
| Front suspension: | Co McPherson strut | |
| Rear suspension: | Several levers and rods | |
| Max weight: | 2400 kg | |
| Front brakes: | Ventilated discs | |
| Rear brakes: | Disc | |
| Kerb Weight: | 1661 kg | |
| ABS: | yes | yes |
| Steering type: | Steering rack and pinion | Steering rack and pinion |
| Power steering: | Hydraulic Steering | |
| Minimum turning circle (turning diameter): | 11.9 m |