Comparison Chrysler PT Cruiser Cabrio 2.4 i 16V Turbo (220 Hp) & Seat Leon III SC 2.0 TDI (150 Hp) start/stop
Add car |
Remove car |
Remove car |
| Brand: | Chrysler | Seat |
| Model: | PT Cruiser | Leon |
| Generation: | PT Cruiser Cabrio | Leon III SC |
| Engine / modification: | 2.4 i 16V Turbo (220 Hp) | 2.0 TDI (150 Hp) start/stop |
| Production start: | 2004 year | 2012 year |
| Production end: | 2010 year | 2015 year |
| Coupe type: | Cabriolet | Coupe |
| Num. of Doors: | 3 | |
| Num. of seats: | 5 | |
| Fuel consumption / economy - urban: | 13.2 l/100 km | 5.1 l/100 km |
| Fuel consumption / economy - extra urban: | 8.2 l/100 km | 3.6 l/100 km |
| Fuel consumption / economy - combined: | 9.9 l/100 km | 4.1 l/100 km |
| Fuel Type: | Petrol (Gasoline) | Diesel |
| Fuel tank volume: | 50 l | |
| Emission standard: | Euro 5 | |
| CO2 emissions: | 235 g/km | 106 g/km |
| Power: | 220 hp | 150 hp |
| Max power in: | 3500-4000 rpm. | |
| Maximum speed: | 215 km/h | |
| Acceleration from 0 to 100 km/h: | 7.6 sec | 8.3 sec |
| Torque: | 320 Nm @ 1750-3000 rpm. | |
| Model Engine: | CKFC, CRBC, CRLB, CRMB | |
| Engine position: | Front, transverse | |
| Engine displacement: | 1968 cm3 | |
| Engine oil capacity: | 4.7 l | 4.6-4.7 l |
| Coolant: | 6.2 l | |
| Fuel System: | Diesel Commonrail | |
| Aspiration / Turbine: | Turbo / Intercooler (Turbocharging / Intercooler) | |
| Position of cylinders: | Inline | |
| Number of cylinders: | 4 | |
| Number of valves per cylinder: | 4 | |
| Compression ratio: | 16 | |
| Piston Stroke: | 95.5 mm | |
| Cylinder Bore: | 81 mm | |
| Wheel Drive: | Front wheel drive | |
| Number of Gears (manual transmission): | 6 | |
| Length: | 4228 mm | |
| Width: | 1810 mm | |
| Height: | 1446 mm | |
| Wheelbase: | 2601 mm | |
| Front track: | 1549 mm | |
| Rear (Back) track: | 1520 mm | |
| Minimum volume of Luggage (trunk): | 380 l | |
| Maximum amount of Luggage (trunk): | 1150 l | |
| Max weight: | 1810 kg | |
| Kerb Weight: | 1285 kg | |
| ABS: | yes | |
| Steering type: | Steering rack and pinion |