Car technical specifications and fuel economy / consumption / mpg

Comparison Chrysler Concorde II 3.2 i V6 24V (228 Hp) & Audi 80 III (B2, Typ 81,85, facelift 1984) 1.8 GTE (112 Hp) quattro


Add car
Chrysler Concorde II 3.2 i V6 24V (228 Hp)
Remove car
Audi 80 III (B2, Typ 81,85, facelift 1984) 1.8 GTE (112 Hp) quattro
Remove car
Brand: Chrysler Audi
Model: Concorde 80
Generation: Concorde II 80 III (B2, Typ 81,85, facelift 1984)
Engine / modification: 3.2 i V6 24V (228 Hp) 1.8 GTE (112 Hp) quattro
Production start: 1997 year 1984 year
Production end: 2002 year 1986 year
Coupe type: Sedan Sedan
Num. of Doors: 4 2
Num. of seats: 5 5
Fuel consumption / economy - urban: 15 l/100 km 10.9 l/100 km
Fuel consumption / economy - extra urban: 9 l/100 km 6.1 l/100 km
Fuel consumption / economy - combined: 9 l/100 km
Fuel Type: Petrol (Gasoline) Petrol (Gasoline)
Drag coefficient: 0.38
Fuel tank volume: 68 l 70 l
Power: 228 hp 112 hp
Max power in: 6300 rpm. 5800 rpm.
Maximum speed: 210 km/h 187 km/h
Acceleration from 0 to 100 km/h: 9.5 sec 9.9 sec
Torque: 305 Nm @ 3800 rpm. 160 Nm/3500 rpm.
Engine position: Front, longitudinal Front, longitudinal
Engine displacement: 3231 cm3 1781 cm3
Fuel System: Multi-point injection Multi-point injection
Position of cylinders: V engine Inline
Valvetrain: DOHC
Number of cylinders: 6 4
Number of valves per cylinder: 4 2
Compression ratio: 9.5 10
Piston Stroke: 81 mm 86.4 mm
Cylinder Bore: 92 mm 81 mm
Wheel Drive: Front wheel drive All wheel drive (4x4)
Number of Gears (automatic transmission): 4
Number of Gears (manual transmission): 5
Length: 5310 mm 4406 mm
Width: 1900 mm 1682 mm
Height: 1420 mm 1350 mm
Wheelbase: 2870 mm 2525 mm
Front track: 1575 mm 1405 mm
Rear (Back) track: 1575 mm 1425 mm
Minimum volume of Luggage (trunk): 530 l 452 l
Maximum amount of Luggage (trunk): 496 l
Front suspension: Coil spring
Rear suspension: Helical spring
Max weight: 1580 kg
Front brakes: Ventilated discs
Rear brakes: Disc
Kerb Weight: 1570 kg 1120 kg
ABS: yes
Steering type: Steering rack and pinion Steering rack and pinion
Minimum turning circle (turning diameter): 10.7 m
Tire size: 225/60 R16 175/70 R13
Wheel rims size: R13