Comparison Chevrolet Orlando I 1.4 turbo (140 Hp) & Mitsubishi Pajero I Canvas Top (L04_G) 2.5 TD (84 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Chevrolet | Mitsubishi |
| Model: | Orlando | Pajero |
| Generation: | Orlando I | Pajero I Canvas Top (L04_G) |
| Engine / modification: | 1.4 turbo (140 Hp) | 2.5 TD (84 Hp) |
| Production start: | 2011 year | 1986 year |
| Production end: | 2018 year | 1989 year |
| Coupe type: | Minivan | Off-road vehicle |
| Num. of Doors: | 5 | 3 |
| Num. of seats: | 7 | |
| Fuel consumption / economy - urban: | 8.1 l/100 km | |
| Fuel consumption / economy - extra urban: | 5.5 l/100 km | |
| Fuel consumption / economy - combined: | 6.4 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Diesel |
| Fuel tank volume: | 60 l | |
| Emission standard: | Euro 5 | |
| Power: | 140 hp | 85 hp |
| Max power in: | 4900 rpm. | |
| Maximum speed: | 200 km/h | |
| Acceleration from 0 to 100 km/h: | 11 sec | |
| Torque: | 200 Nm @ 1850 rpm. | |
| Model Engine: | L044G, L049G | |
| Engine position: | Front, transverse | Front, longitudinal |
| Engine displacement: | 1362 cm3 | |
| Fuel System: | Multi-point injection | Diesel - Standard diesel injection (SDI) |
| Aspiration / Turbine: | Turbocharging | |
| Position of cylinders: | Inline | |
| Valvetrain: | DOHC | |
| Number of cylinders: | 4 | |
| Number of valves per cylinder: | 4 | |
| Compression ratio: | 9.5 | |
| Piston Stroke: | 82.5 mm | |
| Cylinder Bore: | 72.5 mm | |
| Wheel Drive: | Front wheel drive | |
| Number of Gears (manual transmission): | 6 | |
| Length: | 4652 mm | |
| Width: | 1836 mm | |
| Height: | 1633 mm | |
| Wheelbase: | 2760 mm | |
| Front track: | 1584 mm | |
| Rear (Back) track: | 1588 mm | |
| Minimum volume of Luggage (trunk): | 101 l | |
| Maximum amount of Luggage (trunk): | 466 l | |
| Front suspension: | McPherson | |
| Max weight: | 2179 kg | |
| Front brakes: | Disc | |
| Kerb Weight: | 1539 kg | |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Power steering: | Electric Steering | |
| Minimum turning circle (turning diameter): | 11.3 m |