Comparison Chevrolet LUV D-MAX 2.4i (124 Hp) & Volvo V70 III (facelift 2013) 1.6 T4 (180 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Chevrolet | Volvo |
| Model: | LUV D-MAX | V70 |
| Generation: | LUV D-MAX | V70 III (facelift 2013) |
| Engine / modification: | 2.4i (124 Hp) | 1.6 T4 (180 Hp) |
| Production start: | 2006 year | 2013 year |
| Production end: | 2012 year | 2016 year |
| Coupe type: | Pick-up | Combi |
| Num. of Doors: | 4 | 5 |
| Num. of seats: | 5 | 5 |
| Fuel consumption / economy - combined: | 6.0 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 70 l | |
| CO2 emissions: | 139 g/km | |
| Power: | 124 hp | 180 hp |
| Max power in: | 5000 rpm. | 5700 rpm. |
| Maximum speed: | 215 km/h | |
| Acceleration from 0 to 100 km/h: | 8.7 sec | |
| Torque: | 190 Nm @ 2000 rpm. | 240 Nm/1600-5000 rpm. |
| Model Engine: | B4164T | |
| Engine position: | Front, transverse | Front, transverse |
| Engine displacement: | 2405 cm3 | 1596 cm3 |
| Fuel System: | Multi-point injection | Direct injection |
| Aspiration / Turbine: | Turbocharging | |
| Position of cylinders: | Inline | Inline |
| Valvetrain: | DOHC | |
| Number of cylinders: | 4 | 4 |
| Number of valves per cylinder: | 4 | 4 |
| Compression ratio: | 9.6 | 10 |
| Piston Stroke: | 100 mm | 81.4 mm |
| Cylinder Bore: | 87.5 mm | 79 mm |
| Wheel Drive: | Rear wheel drive | Front wheel drive |
| Number of Gears (manual transmission): | 5 | 6 |
| Length: | 5030 mm | 4814 mm |
| Width: | 1800 mm | 1907 mm |
| Height: | 1735 mm | 1547 mm |
| Wheelbase: | 3050 mm | 2816 mm |
| Front track: | 1520 mm | 1588-1578 mm |
| Rear (Back) track: | 1525 mm | 1586-1576 mm |
| Ride height(clearance): | 151 mm | |
| Minimum volume of Luggage (trunk): | 555 l | |
| Maximum amount of Luggage (trunk): | 1580 l | |
| Front suspension: | Independent, Spring McPherson, with stabilizer | |
| Rear suspension: | Independent, spring | |
| Front brakes: | Ventilated discs | |
| Rear brakes: | Disc | |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Minimum turning circle (turning diameter): | 11.7 - 12.7 m |