Comparison Chevrolet Camaro III 5.7 V8 TPI (230 Hp) Automatic & Citroen BX Break Phase II 16 TGI (88 Hp) CAT
Add car |
Remove car |
Remove car |
| Brand: | Chevrolet | Citroen |
| Model: | Camaro | BX |
| Generation: | Camaro III | BX Break Phase II |
| Engine / modification: | 5.7 V8 TPI (230 Hp) Automatic | 16 TGI (88 Hp) CAT |
| Production start: | 1989 year | 1989 year |
| Production end: | 1991 year | 1993 year |
| Coupe type: | Coupe | Combi |
| Powertrain Architecture: | Internal Combustion engine | |
| Num. of Doors: | 2 | 5 |
| Num. of seats: | 4 | 5 |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Drag coefficient: | 0.374 | 0.36 |
| Fuel tank volume: | 59 l | 66 l |
| Power: | 230 hp | 88 hp |
| Max power in: | 4400 rpm. | 6000 rpm. |
| Maximum speed: | 170 km/h | |
| Acceleration from 0 to 100 km/h: | 13.3 sec | |
| Torque: | 128 Nm/2700 rpm. | |
| Model Engine: | 350 CID | |
| Engine position: | Front, longitudinal | Front, transverse |
| Engine displacement: | 5735 cm3 | 1580 cm3 |
| Engine oil capacity: | 4.7 l | |
| Coolant: | 16 l | |
| Fuel System: | Multi-point indirect injection | Multi-point injection |
| Aspiration / Turbine: | Naturally aspirated engine | |
| Position of cylinders: | V engine | Inline |
| Number of cylinders: | 8 | 4 |
| Number of valves per cylinder: | 2 | |
| Compression ratio: | 9.3 | 9.2 |
| Piston Stroke: | 88.39 mm | 73 mm |
| Cylinder Bore: | 101.6 mm | 83 mm |
| Wheel Drive: | Rear wheel drive | |
| Number of Gears (manual transmission): | 5 | |
| Length: | 4877 mm | 4399 mm |
| Width: | 1849 mm | 1682 mm |
| Height: | 1278 mm | 1410 mm |
| Wheelbase: | 2565 mm | 2655 mm |
| Front track: | 1524 mm | 1420 mm |
| Rear (Back) track: | 1549 mm | 1364 mm |
| Minimum volume of Luggage (trunk): | 512 l | |
| Maximum amount of Luggage (trunk): | 878 l | 1803 l |
| Front suspension: | Hydro-pneumatic element | |
| Rear suspension: | Trailing | |
| Max weight: | 1530 kg | |
| Front brakes: | Disc | Disc |
| Rear brakes: | Drum | Disc |
| Kerb Weight: | 1000 kg | |
| Steering type: | Cone worm with recirculation balls | Steering rack and pinion |
| Power steering: | Hydraulic Steering | Hydraulic Steering |
| Minimum turning circle (turning diameter): | 11 m | |
| Tire size: | 245/50 16 | 165/70 R14 |
| Wheel rims size: | R14 |