Comparison BMW 6 Series (E24) 633 CSi (200 Hp) & Dacia Sandero I 1.2 (75 Hp)
Add car |
Remove car |
Remove car |
| Brand: | BMW | Dacia |
| Model: | 6 Series | Sandero |
| Generation: | 6 Series (E24) | Sandero I |
| Engine / modification: | 633 CSi (200 Hp) | 1.2 (75 Hp) |
| Production start: | 1976 year | 2008 year |
| Production end: | 1979 year | |
| Coupe type: | Coupe | Hatchback |
| Num. of Doors: | 2 | 5 |
| Num. of seats: | 4 | 5 |
| Fuel consumption / economy - urban: | 7.6 l/100 km | |
| Fuel consumption / economy - extra urban: | 4.9 l/100 km | |
| Fuel consumption / economy - combined: | 5.9 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Drag coefficient: | 0.41 | |
| Fuel tank volume: | 70 l | 50 l |
| Power: | 200 hp | 75 hp |
| Max power in: | 5500 rpm. | 5500 rpm. |
| Maximum speed: | 215 km/h | 161 km/h |
| Acceleration from 0 to 100 km/h: | 7.9 sec | 13.6 sec |
| Torque: | 284 Nm @ 4250 rpm. | 107 Nm/4250 rpm. |
| Model Engine: | M30 | D4F 732 |
| Engine position: | Front, longitudinal | Front, transverse |
| Engine displacement: | 3210 cm3 | 1149 cm3 |
| Engine oil capacity: | 5.8 l | |
| Fuel System: | Multi-point injection | Multi-point injection |
| Position of cylinders: | Inline | Inline |
| Number of cylinders: | 6 | 4 |
| Number of valves per cylinder: | 2 | 4 |
| Compression ratio: | 9 | |
| Piston Stroke: | 86 mm | |
| Cylinder Bore: | 89 mm | |
| Wheel Drive: | Front wheel drive | |
| Number of Gears (manual transmission): | 4 | 5 |
| Length: | 4755 mm | 4020 mm |
| Width: | 1725 mm | 1746 mm |
| Height: | 1365 mm | 1534 mm |
| Wheelbase: | 2626 mm | 2589 mm |
| Front track: | 1422 mm | |
| Rear (Back) track: | 1487 mm | |
| Minimum volume of Luggage (trunk): | 415 l | |
| Front suspension: | Independent, Spring McPherson, with stabilizer | |
| Rear suspension: | Independent, spring | |
| Max weight: | 1830 kg | 1560 kg |
| Front brakes: | Ventilated discs | |
| Rear brakes: | Disc | |
| Kerb Weight: | 1470 kg | 975 kg |
| ABS: | yes | |
| Steering type: | Worm-reduction unit | Steering rack and pinion |
| Minimum turning circle (turning diameter): | 11.2 m | |
| Tire size: | 195/70 R14 | 185/65 R15 |
| Wheel rims size: | R14 | R15 |