Comparison BMW 5 Series (E28) 520i (125 Hp) Automatic & Audi 80 III (B2, Typ 81,85) 1.8 CL (90 Hp)
Add car |
Remove car |
Remove car |
| Brand: | BMW | Audi |
| Model: | 5 Series | 80 |
| Generation: | 5 Series (E28) | 80 III (B2, Typ 81,85) |
| Engine / modification: | 520i (125 Hp) Automatic | 1.8 CL (90 Hp) |
| Production start: | 1981 year | 1983 year |
| Production end: | 1987 year | 1984 year |
| Coupe type: | Sedan | Sedan |
| Num. of Doors: | 4 | 2/4 |
| Num. of seats: | 5 | 5 |
| Fuel consumption / economy - urban: | 9.4 l/100 km | |
| Fuel consumption / economy - extra urban: | 6.2 l/100 km | |
| Fuel consumption / economy - combined: | 7.9 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Drag coefficient: | 0.40 | |
| Fuel tank volume: | 70 l | 68 l |
| Power: | 125 hp | 90 hp |
| Max power in: | 5800 rpm. | 5400 rpm. |
| Maximum speed: | 170 km/h | |
| Acceleration from 0 to 100 km/h: | 11 sec | |
| Torque: | 170 Nm @ 4000 rpm. | 145 Nm/3300 rpm. |
| Engine position: | Front, longitudinal | Front, longitudinal |
| Engine displacement: | 1990 cm3 | 1781 cm3 |
| Fuel System: | Multi-point injection | Carburettor |
| Position of cylinders: | Inline | Inline |
| Valvetrain: | OHC | |
| Number of cylinders: | 6 | 4 |
| Number of valves per cylinder: | 2 | 2 |
| Compression ratio: | 10 | |
| Piston Stroke: | 66 mm | 86.4 mm |
| Cylinder Bore: | 80 mm | 81 mm |
| Wheel Drive: | Rear wheel drive | Front wheel drive |
| Number of Gears (automatic transmission): | 4 | |
| Number of Gears (manual transmission): | 4 | |
| Length: | 4620 mm | 4383 mm |
| Width: | 1700 mm | 1682 mm |
| Height: | 1415 mm | 1365 mm |
| Wheelbase: | 2625 mm | 2541 mm |
| Front track: | 1430 mm | 1400 mm |
| Rear (Back) track: | 1470 mm | 1420 mm |
| Ride height(clearance): | 140 mm | |
| Minimum volume of Luggage (trunk): | 460 l | 505 l |
| Maximum amount of Luggage (trunk): | 496 l | |
| Max weight: | 1410 kg | |
| Front brakes: | Disc | |
| Rear brakes: | Drum | |
| Kerb Weight: | 930 kg | |
| Steering type: | Steering rack and pinion | |
| Minimum turning circle (turning diameter): | 10.4 m |