Car technical specifications and fuel economy / consumption / mpg

Comparison Audi 80 III (B2, Typ 81,85, facelift 1984) 1.6 D (54 Hp) Automatic & Seat Leon III SC 1.4 TGI (110 Hp) start/stop


Add car
Audi 80 III (B2, Typ 81,85, facelift 1984) 1.6 D (54 Hp) Automatic
Remove car
Seat Leon III SC 1.4 TGI (110 Hp) start/stop
Remove car
Brand: Audi Seat
Model: 80 Leon
Generation: 80 III (B2, Typ 81,85, facelift 1984) Leon III SC
Engine / modification: 1.6 D (54 Hp) Automatic 1.4 TGI (110 Hp) start/stop
Production start: 1984 year 2012 year
Production end: 1986 year 2016 year
Coupe type: Sedan Coupe
Num. of Doors: 2/4 3
Num. of seats: 5 5
Fuel consumption / economy - urban: 6.9 l/100 km
Fuel consumption / economy - extra urban: 4.4 l/100 km
Fuel consumption / economy - combined: 7.2 l/100 km 5.3 l/100 km
Fuel Type: Diesel Petrol / CNG
Drag coefficient: 0.38
Fuel tank volume: 68 l 50 l
Emission standard: Euro 6
CO2 emissions: 124 g/km
Power: 54 hp 110 hp
Max power in: 4800 rpm. 4800-6000 rpm.
Maximum speed: 140 km/h 194 km/h
Acceleration from 0 to 100 km/h: 23.3 sec 10.9 sec
Torque: 100 Nm/2500 rpm. 200 Nm @ 1500-3500 rpm.
Model Engine: CPWA
Engine position: Front, transverse
Engine displacement: 1588 cm3 1395 cm3
Engine oil capacity: 4 l
Fuel System: Diesel - Standard diesel injection (SDI) Direct injection
Aspiration / Turbine: Turbo / Intercooler (Turbocharging / Intercooler)
Position of cylinders: Inline Inline
Number of cylinders: 4 4
Number of valves per cylinder: 2 4
Compression ratio: 23 10
Piston Stroke: 80 mm 80 mm
Cylinder Bore: 79.5 mm 74.5 mm
Wheel Drive: Front wheel drive Front wheel drive
Number of Gears (automatic transmission): 3
Number of Gears (manual transmission): 6
Length: 4406 mm 4228 mm
Width: 1682 mm 1810 mm
Height: 1365 mm 1446 mm
Wheelbase: 2538 mm 2601 mm
Front track: 1395 mm 1549 mm
Rear (Back) track: 1420 mm 1520 mm
Ride height(clearance): 110 mm
Minimum volume of Luggage (trunk): 540 l 275 l
Maximum amount of Luggage (trunk): 1105 l
Max weight: 1440 kg 1840 kg
Kerb Weight: 1000 kg 1359 kg
ABS: yes
Steering type: Steering rack and pinion Steering rack and pinion
Minimum turning circle (turning diameter): 10.7 m