Comparison Audi 100 (C2, Typ 43, facelift 1979) 2.1 L (115 Hp) & Mercedes-Benz W120 Sedan 180 a (65 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Audi | Mercedes-Benz |
| Model: | 100 | Ponton |
| Generation: | 100 (C2, Typ 43, facelift 1979) | W120 Sedan |
| Engine / modification: | 2.1 L (115 Hp) | 180 a (65 Hp) |
| Production start: | 1979 year | 1957 year |
| Production end: | 1980 year | 1959 year |
| Coupe type: | Sedan | Sedan |
| Num. of Doors: | 2/4 | 4 |
| Num. of seats: | 5 | 5 |
| Fuel consumption / economy - combined: | 10.3 l/100 km | 10.9 l/100 km |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Drag coefficient: | 0.42 | |
| Fuel tank volume: | 60 l | 56 l |
| Power: | 115 hp | 65 hp |
| Max power in: | 5500 rpm. | 4500 rpm. |
| Maximum speed: | 176 km/h | 135 km/h |
| Acceleration from 0 to 100 km/h: | 12.2 sec | 21 sec |
| Torque: | 163 Nm @ 4000 rpm. | 127 Nm @ 2200 rpm. |
| Model Engine: | M 121 B IV / 121.923 | |
| Engine position: | Front, longitudinal | |
| Engine displacement: | 2144 cm3 | 1897 cm3 |
| Engine oil capacity: | 4 l | |
| Coolant: | 9 l | |
| Fuel System: | Carburettor | Carburettor |
| Position of cylinders: | Inline | Inline |
| Valvetrain: | SOHC | |
| Number of cylinders: | 5 | 4 |
| Number of valves per cylinder: | 2 | 2 |
| Compression ratio: | 8.3 | 6.8 |
| Piston Stroke: | 86.4 mm | 83.6 mm |
| Cylinder Bore: | 79.5 mm | 85 mm |
| Wheel Drive: | Front wheel drive | Rear wheel drive |
| Number of Gears (manual transmission): | 5 | 4 |
| Length: | 4683 mm | 4485 mm |
| Width: | 1768 mm | 1740 mm |
| Height: | 1390 mm | 1560 mm |
| Wheelbase: | 2677 mm | 2650 mm |
| Front track: | 1470 mm | 1420 mm |
| Rear (Back) track: | 1445 mm | 1460 mm |
| Maximum amount of Luggage (trunk): | 642 l | |
| Max weight: | 1630 kg | 1615 kg |
| Front brakes: | Drum | |
| Rear brakes: | Drum | |
| Kerb Weight: | 1170 kg | 1065 kg |
| Steering type: | Cone worm with recirculation balls | |
| Minimum turning circle (turning diameter): | 11.3 m |