Comparison Aston Martin AMV8 Volante 5.3 (438 Hp) & Opel Insignia Country Tourer 2.0 (250 Hp) AWD Turbo Ecotec start/stop
Add car |
Remove car |
Remove car |
| Brand: | Aston Martin | Opel |
| Model: | AMV8 | Insignia |
| Generation: | AMV8 Volante | Insignia Country Tourer |
| Engine / modification: | 5.3 (438 Hp) | 2.0 (250 Hp) AWD Turbo Ecotec start/stop |
| Production start: | 1972 year | 2013 year |
| Production end: | 1986 year | |
| Coupe type: | Cabriolet | Combi |
| Num. of Doors: | 2 | 5 |
| Num. of seats: | 4 | 5 |
| Fuel consumption / economy - urban: | 10.6 l/100 km | |
| Fuel consumption / economy - extra urban: | 6.6 l/100 km | |
| Fuel consumption / economy - combined: | 8.1 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 70 l | |
| Emission standard: | EURO V | |
| CO2 emissions: | 189 g/km | |
| Power: | 438 hp | 250 hp |
| Max power in: | 6000 rpm. | 5300 rpm. |
| Maximum speed: | 225 km/h | 235 km/h |
| Acceleration from 0 to 100 km/h: | 7.9 sec | |
| Torque: | 536 Nm/5100 rpm. | 400 Nm/2500-4000 rpm. |
| Engine position: | Front, longitudinal | Front, transverse |
| Engine displacement: | 5340 cm3 | 1998 cm3 |
| Fuel System: | Direct injection | |
| Aspiration / Turbine: | Turbocharging | |
| Position of cylinders: | V engine | Inline |
| Number of cylinders: | 8 | 4 |
| Piston Stroke: | 86 mm | |
| Cylinder Bore: | 86 mm | |
| Wheel Drive: | Rear wheel drive | All wheel drive (4x4) |
| Number of Gears (manual transmission): | 5 | 6 |
| Length: | 4700 mm | 4920 mm |
| Width: | 1830 mm | 1856 mm |
| Height: | 1370 mm | 1522 mm |
| Wheelbase: | 2737 mm | |
| Front track: | 1587 mm | |
| Rear (Back) track: | 1590 mm | |
| Minimum volume of Luggage (trunk): | 540 l | |
| Maximum amount of Luggage (trunk): | 1530 l | |
| Front brakes: | Ventilated discs | Ventilated discs |
| Rear brakes: | Ventilated discs | |
| Kerb Weight: | 1860 kg | |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | Steering rack and pinion |
| Power steering: | Electric Steering | |
| Minimum turning circle (turning diameter): | 11.4 m |