Comparison Aston Martin AMV8 Volante 5.3 (309 Hp) Automatic & Mercedes-Benz W180 II Sedan 220 S (106 Hp) Hydrak
Add car |
Remove car |
Remove car |
| Brand: | Aston Martin | Mercedes-Benz |
| Model: | AMV8 | Ponton |
| Generation: | AMV8 Volante | W180 II Sedan |
| Engine / modification: | 5.3 (309 Hp) Automatic | 220 S (106 Hp) Hydrak |
| Production start: | 1978 year | 1957 year |
| Production end: | 1989 year | 1959 year |
| Coupe type: | Cabriolet | Sedan |
| Num. of Doors: | 2 | 4 |
| Num. of seats: | 4 | 5 |
| Fuel consumption / economy - combined: | 10.9 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 64 l | |
| Power: | 309 hp | 106 hp |
| Max power in: | 5000 rpm. | 5200 rpm. |
| Maximum speed: | 229 km/h | 160 km/h |
| Acceleration from 0 to 100 km/h: | 17 sec | |
| Torque: | 172 Nm @ 3500 rpm. | |
| Model Engine: | M 180 III / 180.924 | |
| Engine position: | Front, longitudinal | Front, longitudinal |
| Engine displacement: | 5340 cm3 | 2195 cm3 |
| Engine oil capacity: | 11.9 l | |
| Coolant: | 11.4 l | |
| Fuel System: | Carburettor | |
| Position of cylinders: | V engine | Inline |
| Valvetrain: | SOHC | |
| Number of cylinders: | 8 | 6 |
| Number of valves per cylinder: | 2 | |
| Compression ratio: | 9 | 8.7 |
| Piston Stroke: | 85 mm | 72.8 mm |
| Cylinder Bore: | 100 mm | 80.01 mm |
| Wheel Drive: | Rear wheel drive | Rear wheel drive |
| Number of Gears (automatic transmission): | 3 | |
| Number of Gears (manual transmission): | 4 Hydrak | |
| Length: | 4674 mm | 4750 mm |
| Width: | 1830 mm | 1740 mm |
| Height: | 1372 mm | 1560 mm |
| Wheelbase: | 2610 mm | 2820 mm |
| Front track: | 1500 mm | 1430 mm |
| Rear (Back) track: | 1500 mm | 1470 mm |
| Ride height(clearance): | 140 mm | |
| Front suspension: | Double wishbone | |
| Rear suspension: | Suspension De-Dion | |
| Max weight: | 1790 kg | |
| Front brakes: | Ventilated discs | Drum |
| Rear brakes: | Ventilated discs | Drum |
| Kerb Weight: | 1791 kg | 1340 kg |
| Steering type: | Steering rack and pinion | Cone worm with recirculation balls |
| Minimum turning circle (turning diameter): | 11.58 m |