Comparison Alfa Romeo Giulietta (116) 2.0 (116.A1A) (131 Hp) & Seat Ibiza III (facelift 2006) 1.4 TDi (70 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Alfa Romeo | Seat |
| Model: | Giulietta | Ibiza |
| Generation: | Giulietta (116) | Ibiza III (facelift 2006) |
| Engine / modification: | 2.0 (116.A1A) (131 Hp) | 1.4 TDi (70 Hp) |
| Production start: | 1980 year | 2006 year |
| Production end: | 1985 year | 2008 year |
| Coupe type: | Sedan | Hatchback |
| Num. of Doors: | 4 | 3-5 |
| Num. of seats: | 5 | 5 |
| Fuel consumption / economy - urban: | 5.9 l/100 km | |
| Fuel consumption / economy - extra urban: | 4.1 l/100 km | |
| Fuel consumption / economy - combined: | 4.7 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Diesel |
| Fuel tank volume: | 45 l | |
| Power: | 131 hp | 70 hp |
| Max power in: | 4000 rpm. | |
| Maximum speed: | 166 km/h | |
| Acceleration from 0 to 100 km/h: | 14.8 sec | |
| Torque: | 155 Nm @ 2200 rpm. | |
| Model Engine: | BNM | |
| Engine position: | Front, transverse | |
| Engine displacement: | 1422 cm3 | |
| Engine oil capacity: | 4.2 l | |
| Coolant: | 5 l | |
| Fuel System: | Pump-nozzle (Unit Injector) | |
| Aspiration / Turbine: | Turbocharger | |
| Position of cylinders: | Inline | |
| Number of cylinders: | 3 | |
| Number of valves per cylinder: | 2 | |
| Compression ratio: | 19.5 | |
| Piston Stroke: | 95.5 mm | |
| Cylinder Bore: | 79.5 mm | |
| Wheel Drive: | Front wheel drive | |
| Number of Gears (manual transmission): | 5 | |
| Length: | 3977 mm | |
| Width: | 1698 mm | |
| Height: | 1441 mm | |
| Wheelbase: | 2460 mm | |
| Front track: | 1535 mm | |
| Rear (Back) track: | 1524 mm | |
| Ride height(clearance): | 130 mm | |
| Minimum volume of Luggage (trunk): | 265 l | |
| Maximum amount of Luggage (trunk): | 1030 l | |
| Max weight: | 1620 kg | |
| Front brakes: | Ventilated discs | |
| Rear brakes: | Drum | |
| Kerb Weight: | 1106 kg | |
| Tire size: | 185/60 R14; 195/50 R15 | |
| Wheel rims size: | R14; R15 |